1. Fireproof and flame retardant: The fireproof grade reaches A1, it will not burn when exposed to high temperature and will not produce harmful gases.

2. Super scrub resistance: The number of scrubbing times is ≥20,000 times.

3. Good stain resistance: The stain resistance grade reaches I level.

4. Good air permeability: The coating film is transparent and has super air permeability. The moisture inside the building can evaporate freely to the outside, keeping the wall dry.

5. Moisture-proof and mildew-proof: The mildew-proof grade reaches 0, which inhibits the growth of mold on the wall due to moisture.

6. High hiding power: It can cover fine cracks, the contrast ratio is ≥0.95, and it meets the standards of superior interior wall coatings.

7. Durable: It can penetrate the wall and produce petrochemical reactions with the wall, and it has good durability.

8. Inorganic and environmentally friendly: non-toxic, odorless, non-irritating, does not contain allergens, preservatives, fungicides and other harmful substances; formaldehyde, benzene, VOC, soluble heavy metals and other harmful substances are not detected, healthy, environmentally friendly, safe and harmless.

• Theoretical dosage: about 4-5㎡/KG/2 times depending on the specific process, the actual consumption varies depending on the construction method and the flatness of the base
• Dilution ratio: depending on the specific construction situation, it can be diluted with no more than 10% of clean water.
• Drying time: about 2 hours for surface drying; recoating time is at least 2 hours (25℃, 50% relative humidity), and it can be extended moderately at low temperature.
• Maintenance time: 7 days/25℃, which can be extended at low temperature (not less than 5℃) to obtain the ideal coating effect.
• Implementation standards: GB18582-2020 "Limits of Hazardous Substances in Wall Coatings for Buildings", GB/T 9756-2018 "Synthetic Resin Emulsion Interior Wall Coatings", GB8624-2012 "Classification of Combustion Performance of Building Materials and Products".
• Product specifications: 20KG/barrel.
• Shelf life: refer to product label.

• Construction method: rolling, spraying, brushing, etc.
• Construction environment: It is not suitable to construct when the temperature is lower than 5℃ or the relative humidity is above 80%.
• Base treatment: Before construction, clean the surface of the base to be painted to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as ash sand, plaster, cement, etc. (pH value is lower than 10, moisture content is lower than 10%) should be dried before construction.
• During construction, please configure necessary protective and labor protection supplies such as protective glasses, gloves and professional construction clothes according to local operating specifications.
• Before construction, it should be fully stirred and used in a certain proportion. The mixing container must be clean and free of other chemical substances.
• During and after construction, please use clean water to clean the equipment in time.